How to Flash
Step 2: After extracting you will find the SP Flash Tool, Driver and instruction manual.
Step 3: Install the USB Drivers (skip if drivers are already installed).
Step 4: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 5: Connect your Smartphone to the computer using the USB Driver.
Step 6: Click on Upgrade / Download Button in the SP Flash Tool to Begin the Flashing.
Step 7: Green Ring will appear at the end of successful Flash.
[*] Take a Backup of your personal data before flashing or installing the firmware on your smartphone. As this helps you to recover the personal data whenever any thing wrong happens.
- How To Flash Micromax Convas Doddle 3
- Flash Micromax A102
- Micromax A102 Unlocking
- Micromax A102 Repair Using SP Tools
- Micromax A102 Re install
- How to flash Micromax A102 using stockrom
- Micromax A102 stock rom
- Micromax A102 remove virus
- Micromax A102 V8_2_5 [8GB+1GB] Model